Home > Knowledge > Content
The general way of speed regulation for the sectional warping machine
- Dec 17, 2018 -

The sectional warping machine has evolved from the past mechanical transmission and control to modern mechanical transmission and microcomputer control. Therefore, the process design has also undergone qualitative changes. The moving speed of the original sectional warping machine has a stepwise change. Therefore, in order to obtain a good warping forming, the tilt angle of the inclined angled board is generally adjusted to meet the requirements. The new high-speed sectional warping machine is fixed by the inclined angle of the inclined angle plate, and the moving speed of the fixed width can be changed steplessly, and the moving speed of the fixed width  is controlled by the microcomputer to the servo motor, and the setting and the change are convenient. Therefore, as long as the appropriate fixed-width moving speed is calculated, the requirements can be met.

The new high-speed sectional warping machine is widely used in the warping of silk fabrics with bismuth chemical fiber, and it is an ideal strip warping equipment matched with shuttleless looms. In this paper, the design and calculation of process design and calculation, warping length and tension are briefly described. It is pointed out that the new high-speed sectional warping machine has the characteristics that the inclined angle of the inclined angle plate is fixed and the moving speed of the fixed width and the moving speed can be changed steplessly. As long as the appropriate framing box moving speed is calculated, the requirements can be met.

 https://www.dekemachinery.com/