Home > Knowledge > Content
Sectional Warping Machine for air jet loom Advantages of the warp beam transmission form
- Mar 14, 2019 -

In the process of warping, the process always requires the warp beam transmission of the warping machine to reach constant line speed and constant tension. This is very difficult for ordinary warping machines to achieve this effect, and the emergence of the slitting warping machine for the air jet loom solves this problem, mainly because it uses the direct transmission of the warp beam. Form, which enables high speed and high quality warp beams to be obtained.

 

The air jet loom uses a split-type warping machine to make the oil motor drive the warp beam by means of hydraulic stepless speed change. In this process, the transmission speed is larger than the general range. And the torque of the oil motor is also larger than that of the general warping machine, so it is easy to start, so that the split warping machine can achieve the purpose of constant line speed and constant tension, and the strip warping machine can be made smooth throughout the whole process. And frequent reversing movements.

 

The main equipment of the head of the air-jet loom is divided into twisting, warping drum winding, bar and cone angle adjustment, traversing of the shaft when the shaft is broken, winding of the weaving shaft, self-stop of the full-winding and recording Print, brake and up and down shafts. The warp beam is a direct drive, and adopts DC motor speed regulation, or AC motor frequency conversion speed regulation, or hydraulic stepless speed regulation, and the pressurization of the warp beam is completed by the pressure roller.

https://www.dekemachinery.com/