Home > Knowledge > Content
Operating procedures for jacquard water jet loom
- Jan 31, 2019 -

The main advantage of the  jacquard water jet loom is cost economy and high work efficiency. The machine belongs to a shuttleless loom which drives the weft yarn through the shed by the frictional traction generated by the jet of clean water, and is generally used for textile chemical fiber fabrics, such as glass filaments and hydrophobic filaments. Due to the special requirements for water quality, water treatment equipment is required.

In general,  jacquard water jet loom is mostly used for the processing of narrow and medium fabrics. On the jacquard machine, the pattern is placed on the flower tube, and each weave is turned over a pattern, and the flower tube is pressed against the horizontal needle once. When there are holes in the pattern, the head end of the horizontal needle extends into the hole of the pattern and the flower tube, so that the hook end of the straight needle is still hung on the knife. When the knife is raised, the straight needle is raised, and the heald is lifted by the first hook and the through-belt. At this time, the warp thread that penetrates the eye is also lifted to form the upper layer of the shed.

Users need to be proficient in the operation rules of the water jet jacquard machine. Remember to press the left and right red stop buttons during maintenance to indicate that the machine is in the process of maintenance. It is strictly forbidden to cross the barriers, slow down and down the stairs, and beware of slipping. It is strictly forbidden to detach the pattern bridge across the bridge, arbitrarily hang the floor of the gantry and roll off, injuring the equipment and the blocker. Do not place the tools at random to prevent accidents caused by falling hands during operation.

https://www.dekemachinery.com/